Makita AN922 Round Head 2-Inch to 3-1/2-Inch Framing Nailer

View The Website

If you were looking for a sturdy and lightweight nailer, then the Makita framing nailer AN922 would be the ideal choice. Weighing only 8.4 pounds, this round head framing nailer, has a rugged aluminum body and magazine. The overall structure is very well balanced, and all controls are within easy reach, making the operation very comfortable. This framing nail gun, fires wire, or plastic collated, 2 to 3.5 inches, 22 degrees stick nails having round heads. According to the company, this air nail gun also works with 21 degrees nails.

Power and Controls

The Makita AN922 framing nail gun can deliver an operating pressure of 65 to 120 PSI, which is quite adequate for all framing requirements, and for making furniture. Precise adjustment of the pressure is also possible with the dial wheel for nail depth adjustment. Here, the operator has the convenience of setting nine different penetration depths for the nails, without using any other tools. This dial control is also very useful when you are working with woods of different densities and hardness, as you can increase the penetration power for very hard woods.

Good Build and Design

A lot of thought has gone into the designing of Makita AN922 framing nailer, to make it more lasting, and easy to use. The handle has an ergonomic design with a convenient rubber grip for easy handling, and the nail magazine can be easily loaded with a simple pull on the rod. The inner mechanism is also quite interesting, as the company has included an air filtering system in ceramic, to prevent the entry of any debris during operation, and the tool is fitted with a rubber bumper to minimize jolts. All this prolongs the life of this tool, and the down time is reduced considerably. There is also a protective feature to prevent firing of the tool, when the nails in the magazine have been exhausted, which also extends the tool life.

The selector switch provides two modes of operation, and you can operate the tool in sequential or bump mode. This switch also provides an “off” mode, which is very useful while transporting the tool, and preventing any accidents. The nosepiece has a spiked grip design, so that it cannot easily slip from the work surface. All these features make the operation of this round head framing nailer very convenient and safe.

Magazine and Hose

The rugged magazine made of aluminum, of the Makita framing nailer, is easy to load, and has a large capacity of up to 74 nails. The loading mechanism is simple, where you insert the row of nails, and push then in with a pull on the pusher rod. For attaching the air power, the tool has a 3/8 inch threaded opening, and you might need to purchase a bushing if your hose has a different diameter.

Summarizing Makita AN922 Framing Nailer Customer Reviews

Every product has distinct advantages and certain disadvantages as well. Judging by the feedback of various users the following list of pros and cons was prepared.

Pros Professional, as well DIY users were both impressed by the consistent pressure and enhanced power delivered by this framing nail gun. Most people also liked the balance of the tool, and the ease with which it could be operated. Professionals who worked with this tool throughout the day found it less stressful than other models, as the reloading and advancing were much easier, with very few instances of jamming.

Save up to 20% on Power Tools on Amazon.com

Cons Certain users found that toenailing was a bit difficult with the Makita framing nailer, as the power dial had to be adjusted frequently to get the right penetration.

In certain cases while using in the bump mode, the depth dial would move, with the shock of the kickback after firing. The repercussion seemed too strong, and if the depth dial was moved to a lesser setting, the power was not enough to drive the nails in, totally. Another regret of most users was the absence of a carry case. The cardboard box, which comes along with the tool, is not sturdy, and is not adequate even for a home user.

Conclusion The Makita framing nailer AN922 is quite a powerful tool, and is easy to handle. Overall quality of the product is quite good, and this tool can last a long time. It requires a bit of practice to get the settings right, and the depth dial can prove cumbersome in certain instances.

Visitors were interested in:

• an922 round head 2-inch to 3-1/2-inch framing nailer
• makita 922
• makita an923 versus an922
• makita an923 vs 922
• makita framing gun review
• makita nail guns an923
• what is the difference of the makita an922 and the an923